Відео

Excellent work. Where can that type of banding be purchased?

As set up instructions go your about eighty percent correct but not 100. Far to many do not adjust the guides properly and you CAN overtension a blade. Your advice on adjusting the rear guides in particular is only partially correct and will not ensure both guides take the cutting load evenly. All to often this leads to burning the face of the lower or upper guide and twisting the blade in the cut. The other thing everyone neglects to mention is feed speed regulation. Feeding to fast clogs the gullets and heat build up causes premature dulling of the teeth. The exact position for tracking depends on how much crowning their is on the wheel rubber and the width of the blade. Solid blade guides of brass work far better than ball bearings. Blade slap and vibration is the kiss of death to smooth cutting and blade life. I was taught the basics of bandsaw set up the same as you at the London College of Furniture but it took 35 years in the trade to learn all the real tricks. Far to many bandsaws are inferior in quality and alignment. If the blades aren't welded accurately they will not track properly. If there is not enough crown in the wheel's same problem.

Great job brah! Really well done. Subbed.

No insulation?? Prepare to have a damp space.

Just gone to take a look at this on the website and its no longer available. gutted

Bravo! Beautiful work.

Love this, the leg profile blending into top is first class!!!

You really are incredibly talented! Just remember, if you’re really good at doing something, don’t give it away.

Fantastic work once again. Turning those posts must be difficult getting them all similar. Cheers

Great work!

Superb. Watch with my wife. I didn't count how many times she said wow but it's more than she has given me in 20 years.

Amazing work as always Sean and copy turning isn't easy so well done on getting the legs perfect

Awesome, not a lot else to explain.

Hello fellow lovers of woodworking. Am a long time admirer of Sean's wood working style especially the vid where he did the inlay bandings. I have a friend who has started a new channel. Please support him, thank you all youtube.com/@onlythebestmelodies?si=a5BoKhAWBPI3zEGV

Goes to website to find super accurate square. Search square. 480 results with the square in question nowhere in sight. ....the one in my garage will have to do.

Hi Sean, I'm a novice woodturner of 67 returning to a skill I first learnt 53 years ago in school. In between I was a professional photographer with skills in multiple line film exposures, then a salesman for specialist reprographic materials until 1984/5 when the Mac started the DTP revolution. Been an IT guy with graphics knowledge ever since, and I see in you that degree of focus that took me through a whole career of attention to detail which got me client after client. Your 'simple' point and pencil-line method of aligning the grain in the Padauk so that the specular reflection didn't deviate was a master class in itself. This is the first of your video's I've seen and I'll be watching many more I'm sure.

I know sjoberg is quality stuff but this unit seems more like ikea than sjoberg, doesn’t seem like it’ll go the distance. I wish you the best of luck with it, but it seems a bit disappointing.

Background music is so annoying...never heard of this brand of scroll saw.

Genius work, but please find a method to keep those talented digits away from that blade.

Love the Kumiko design. I've been adding some smaller pieces to some of my own work. Where/how did you come up with your design?

Thsnks very good video

Hi Sean, Love your videos. I just have a question ,wonder if you have come across this problem. Seen as your workshop is built out of bricks and you are in the UK, it would be a similar situation to mine, I'm from Ireland and my shed is build of cinder blocks. My question is do you ever have any problems with dampness or high humidity in your workshop and how did you deal with it? I have major problems with mine, i have a humidity gauge and its constantly around 90% unless i open all windows and doors which it only comes down to 75% when its a sunny day. Thanks.

Oh wow. Very nice.

Very cool looks great

Great idea, they look like part of the bench. Cheers.

Nice storage system. I've been looking at a Sjoberg for potentially replacing my existing homemade workbench down the road. Love that clamp wall!

As a woodworker why didn't you build your own drawers?

I always enjoy your videos. Would love to see them more often and with more substantive content.

Gorgeous & clean way too , love hand tools.😊

👍💓!!

Beautiful

Currently speedrunning youtube because only one knifemaker uses Carnuba on his blades.

Nice work,and without a steady rest

What kind of glue do you use?

i need this. from where?

Do you want some wall to go with those clamps😂

Just a clone of the Canadian Excalibur

Fair play, literally living my dream, in the process of building my first workshop, I can’t wait to be able to create projects at home in my own space.

Does the fence come on and off quickley , and sliding table lock solid for ripping with the table saw ?

Sean, when you cut your tails after removing the tape, are you cutting right to the edge of the tape and are you chiseling them clean afterward? I ask because your joints are super tight.

Massive work! Thank you for these great videos. Can I use some clips of one of your video for educational use on my website? I've sent you details on facebook. Looking for your reply!

How much for a 4x8 sheet?

Great video, I am catching on by making mistake first. This will help others bypass that step. I focus so much now on the base lines because as you say "the angle of the tails are not important, as long as they are strait". And once the base line has been violated, it is game over. Just for fun, I recommend that people try free handing dove tails without guide lines, it is quite liberating.

Mine works too. I used woodprix plans and made it without any problems.

Well done! But the music🙉

I don’t see how it comes close to incra ls positioner in.. any way!

den anleimer hätte ich anders gehandhabt sonst super 👍

Awesome video!! Im sold.

Good.n.the best table router...2023

👍👍👍👍👍👍